technical data sheet rpc-1.85 straight jack 08K121-271S3 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany fax: +49 8684 18-499 www.rosenberger.de email: info@rosenberger.de 1 / 2 rf_35/12.04/3.0 all dimensions are in mm; tole rances according to iso 2768 m-h interface according to iec 61169-32 mechanically compatible with rpc-2.40 documents assembly instruction 02 a3 material and plating connector parts material plating center contact beryllium copper gold, min. 1.27 m, over chemical nickel outer contact stainless steel passivated dielectric peek solder sleeve brass gold, 0.1 m min.
technical data sheet rpc-1.85 straight jack 08K121-271S3 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany fax: +49 8684 18-499 www.rosenberger.de email: info@rosenberger.de 2 / 2 rf_35/12.04/3.0 f(ghz) electrical data impedance 50 frequency dc to 65 ghz return loss 20 db, dc to 65 ghz insertion loss 0.05 x db insulation resistance 5 g center contact resistance 4.0 m outer contact resistance 2.5 m test voltage 500 v rms working voltage 150 v rms rf-leakage 100 db up to 1 ghz - limitations are possible due to the used cable type - mechanical data mating cycles 500 center contact captivation 20 n coupling test torque 1.65 nm recommended torque 0.80 nm to 1.10 nm environmental data temperature range -40c to +85c thermal shock iec 61169-1, subclause 9.4.4 corrosion iec 61169-1, subclause 9.4.6 vibration iec 61169-1, subclause 9.3.3 shock iec 61169-1, subclause 9.3.14 moisture resistance iec 61169-1, subclause 9.4.3 2002/95/ec (rohs) compliant tooling n/a suitable cables ut 85 / rtk-fs 085 / rtk-flex 405 packing standard 1 pce in bag weight 11.4 g/pce draft date approved date rev. engineering change number name date herbert babinger 25/08/04 krautenbacher j. 19/10/06 b00 06-0478 b. dandl 19/10/06 while the information has been carefully compiled to the best of our knowled g e, nothin g is intended as representation or warranty on our part and no statement herein shall be construed as recommendation to infringe existin g patents. in the effort to improve our products, we reserve the right to make changes judged to be necessary.
|
